Vacancies
Vacancies > Job Vacancy Announcement Detail
Job Vacancy Announcement Detail
| Employer: | C Pacific Corporation |
| DBA: | Two Seasons Resort and Suites |
| Address: | P.O. BOX 503984 SAIPAN, Northern Mariana Islands 96950 United States |
| Phone: | 670-233-6927 |
| Other Number: | |
| Contact C Pacific Corporation via email | |
| Job Vacancy Announcement | JVA |
| JVA Type: | New |
| Island | Saipan |
| FLSA Covered? | No, not covered |
| DOD related? | No |
| PERM related? * | No |
| VEVRAA related? | No |
| Original Number of Openings: | 5 |
| Number of Openings Currently Available | 5 |
| Specific Worksite location: | Dandan |
| Job Classification: | Installation, Maintenance, and Repair Occupations |
| Job Title: | Heating, Ventilation and Air Conditioning Mechanics |
| Announcement Number: | 19-10-80781 |
| Job Classification: | Installation, Maintenance, and Repair Occupations |
| Opening Date: | 10/1/2019 |
| Closing Date: | 10/22/2019 |
| Salary Range: | $8.08 to $8.58 / Hourly |
| Job Title: | Heating, Ventilation and Air Conditioning Mechanics |
| Job Duties: | Test pipe or tubing joints or connections for leaks, using pressure gauge or soap-and-water solution. Test electrical circuits or components for continuity, using electrical test equipment. Repair or replace defective equipment, components, or wiring. Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions. Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants. Install, connect, or adjust thermostats, humidistats, or timers. Connect heating or air conditioning equipment to fuel, water, or refrigerant source to form complete circuit. Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components. Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area. Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, flues, or stokers. Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools.Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions. Adjust system controls to settings recommended by manufacturer to balance system. Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms. Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.Install magnetic-centrifugal chillers, compressors, or related equipment to cool air temperatures through the use of recirculating water. Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills. Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools. Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems. Assemble, position, and mount heating or cooling equipment, following blueprints or manufacturer's specifications. Fabricate, assemble, or install duct work or chassis parts, using portable metal-working tools or welding equipment. Install radiator controls for room-level zone control heating of residential or commercial buildings. Install or repair self-contained ground source heat pumps or hybrid ground or air source heat pumps to minimize carbon-based energy consumption and reduce carbon emissions. Wrap pipes, securing insulation in place with cement or wire bands. |
| High School Diploma Required? | Yes |
| Qualification Requirements: | With 12 months related experience. Must have the necessary physical stamina. Must be able to work for extended hours or work days. Must be careful during working hours to avoid injury. Must be able to work with powered tools |
| Full or Part Time: | Full Time |
| Hours per Week: | 40 |
| Hours per Day: | 8 |
| Payment Frequency: | bi-weekly |
| Overtime Available: | Yes |
| Overtime Rate: | $12.12 - $12.87 |
| Rate x 1.5 per hour Exempted: | No |
| Specify All Payroll Deductions: | All applicable taxes |
| Required tools, supplies and Equipment to be provided: | None |
| Anticipated starting date of employment: | 10/1/2019 |
| Anticipated closing date of employment: | 9/30/2020 |
| Housing Provided: | No |
| Food Provided: | No |
| Transportation required: | No |
| If transportation is required, daily transportation to and from the worksite(s) will be provided to the workers. Daily pick-up place(s) will be at: | N/A |
| Fringe Benefits: | None |
| Comments: |